This machine focus is on individual production solutions. All 3 axes X, Y and Z are powered by servomotors and drives through precision ball screws. All guideways are of precision Vee and Flat construction lined with turcite material. Feed rates start from a few millimeters to a very wide range on the upper end. Rapid feed in all directions is also available.

Total table traverse 600mm
Spindle drive 3.75KW to 11.25KW
Distance, table to spindle centre 400/450mm

Spindle is of superior rigid construction to handle heavy full cut grinding load.

Coolant system consists of multiple nozzles placed adequately depending on the nature of the component.

The coolant flow is effected with adequate pressure upto a maximum of 15 bar.

The grinding area is fully enclosed within a stationary guard.

Coolant mist exhauster may be provided as necessary.

Dressing systems:

A.  Table mounted dressing attachment for path controlled      dressing of the grinding wheel with diamond contouring discs
     by using the existing machine axes.

B.  Full form roll dressing attachment mounted on worktable.

Fully automatic cycle to include rapid approach creep feed grinding, auto dressing, compensation and return to home position.